Maxwood Technology

  • Full Screen
  • Wide Screen
  • Narrow Screen
  • Increase font size
  • Default font size
  • Decrease font size

Toll Free 1300 721 567

B2.a Self Righting Bollard

To provide emergency access and resist damage.

The Self-Righting Bollards have been developed to take a nudge from a vehicle and can be displaced up to about 45° without damage to the bollard. Should they be nudged more than 45° then a link inside will snap and the Bollard will fall flat on the ground but be retained in the general area by a chain. Later the snappable link can be replaced and the bollard returned to its upright position.
  • Polished 304 Stainless Steel construction with reflective ring. Grade 316 available on request
  • Can be pushed over to about 45° by vehicles only and will automatically return to upright position.· When pushed beyond 45°
  • (e.g. by a Fire Engine for access) a shear pin will break allowing the bollard to drop to the ground.· When dropped, the bollard will remain secured by a chain.
  • A new low-cost shear pin and a few minutes of labour will restore the bollard.
You are here: B2.a Self-Righting Bollard